Determination of the critical parameters of the technological process of obtaining solid dosage forms with dry extract and crushed roots and rootes of Scutellaria baicalensis

Keywords: Scutellaria baicalensis, validation, сritical parameters, technological process

Abstract

An important condition for obtaining a high-quality drug is the determination of critical points and parameters of the production process, which is divided into several successive stages.

The aim study of the critical parameters of the production of tablets and capsules with vegetable raw materials. For this purpose, validation studies of technological processes were carried out for tablets with dry extract of Scutellaria baicalensis and hard gelatin capsules with vegetable raw materials.

The subject of our research was the technological process of obtaining tablets based on dry extract of the roots and rhizomes of Baikal skullcap and hard gelatin capsules based on crushed raw materials. We have identified critical process parameters for each stage. Validation tests were carried out for certain critical process parameters and acceptance criteria were calculated.

Quality control of finished tablets based on dry extract of Baikal skullcap and finished hard gelatin capsules based on crushed roots and rhizomes of Baikal skullcap was performed according to the following indicators: appearance, identification, average weight, mass uniformity, disintegration, dissolution, abrasion, microbiological purity, quantitative determination .

The obtained validation data of experimental-industrial series meet the acceptance criteria, and the developed technology is reproducible and promising for further validation.

On the basis of the obtained results, it can be concluded that the established critical values of the parameters of the production processes and their conditions of carrying out allow for stable and reliable production of semi-finished and finished products that meet the quality standards in accordance with regulatory documents.

References

1. Good Manufacturing Practice for Pharmaceutical Products: Main Principles / World Health Organization technical Report Series. – 2003. – 908 p. Available from: http://www.who.int.
2. WHO guidelines on good manufacturing practices (GMP) for herbal medicines. – Geneva: World Healh Organization European, 2007. – 72 p.
3. Abdul Saleem Mohammad, Swetha Devidi, Nikhat Fatima et al. An Overview of Validation and Basic Concepts of Process Validation: Quality Assurance View Point // Asian J. Pharm. Tech. – 2016. – V. 6, N 3. – P. 169–176. https://doi.org.10.5958/2231-5713.2016.00024.6
4. Derzhavna Farmakopeya Ukrayini: v 3 t. / Derzhavne pidpriemstvo «Ukrayinskiy naukoviy farmakopeyniy tsentr yakostI likarskih zasobiv». 2-e vid. – Harkiv: Derzhavne pidpriemstvo «Ukrayinskiy naukoviy farmakopeyniy tsentr yakosti likarskih zasobiv», 2015. – V. 1. – 1128 p.
5. Pat. 129790 Ukrayina, MPK A 61K 36/539, A61R25/28. Farmatsevtichna kompozitsiya nootropnoyi diyi / Slipchenko G. D., Ruban O. A., Shtrigol S. Yu., Kudina O. V. (Ukrayina). – u 2018 05553; Zayavl. 21. 05. 2018; Opubl. 12. 11. 2018; Byul. 21.
6. Pat. 129791 Ukrayina, MPK A 61K 36/539, A61R25/28. Farmatsevtichna kompozitsiya dlya polipshennya integratsiynoyi diyalnosti golovnogo mozku u formi tabletok / Slipchenko G. D., Ruban O. A., Shtrigol S. Yu., Kudina O. V. (Ukrayina). – u 2018 05554; Zayavl. 21. 05. 2018; Opubl. 12. 11. 2018; Byul. 21.
Published
2019-07-01
How to Cite
Slipchenko, G. D. (2019). Determination of the critical parameters of the technological process of obtaining solid dosage forms with dry extract and crushed roots and rootes of Scutellaria baicalensis. Farmatsevtychnyi Zhurnal, (3), 56-64. https://doi.org/10.32352/0367-3057.3.19.07
Section
Pharmaceutical technology