Using the thermal methods of analysis in selecting the optimal production techniques for tablets based on ademetionine 1,4-butanedisulfonate substance

  • K. S. Burdak JSC «Farmak», Kyiv
  • T. G. Yarnyh National University of Pharmacy, Kharkiv
  • I. B. Yanchuk JSC «Farmak», Kyiv
  • G. I. Borschevskiy JSC «Farmak», Kyiv
Keywords: pills, ademetionine, thermal gravimetric analysis, scanning calorimetry

Abstract

When developing tablets on the base of ademetionine 1.4-butandionsulfonat substance it is difficult to obtain a stable product, as substance is hygroscopic, and its quantity in the tablet is 90% by weight of the core.

The aim of our work was the choice of conditions which would assure the safety of physical and chemical properties of the substance in the production process and allowed to get quality product.

Tablet mass was prepared by dry mixing, controlling the relative humidity in the range from 15 to 50% and a temperature from 15 to 25 °C. Studies were carried out by differential scanning calorimetry and the method for determining the weight of moisture. The results were compared with those obtained in studies for comparing drug Geptral (Abbott SpA, Italy).

As a result of studies was found that study samples number 1 and number 2 are as close as possible to their thermodynamic properties to the comparing drug. However, achieving a relative humidity of 15% is costly compared with values reaching 20%. Thus in the case of serial production is sufficient to create the following conditions: relative humidity not above 20%, the temperature +20,0 ± 2,0 °C.

References

1. Gavrilov AS, Pharmaceutical Technology. Manufacture of medicines. Textbook - M .: Gaoter-Media, 2010. - 624 pp.
2. Dmitrievsky D.I., Boguslavska L. I., Khokhlova L. M. and others. Technology of medicinal products of industrial production. - Vinnitsa: New Book, 2010. - 280 p.
3. Kucheryavyy Yu. A., Morozov SV Hepatoprotectors: rational aspects of application. Uch allowance for doctors. - M .: Forte Print, 2012. - 36 p.
4. Demarest S. Differential Scanning Calorimetry in Biopharmaceutical Sciences / Biophysical Characterization of Proteins in Developing Biopharmaceuticals (Chapter 11). - 2015 - 287 p.
5. Bharvada E., Shah V., Misra M. Exploring the mixing uniformity of a pharmaceutical blend in a high shear granulator using enthalpy values obtained from DSC // Powder Technol. - 2015. - P. 103-111.
6. Ford J., Willson R. Thermal analysis and calorimetry of pharmaceuticals / Handbook of Thermal Analysis and Calorimetry (Chapter 11). - 2009 – 923 p.
Published
2018-09-04
How to Cite
Burdak, K. S., Yarnyh, T. G., Yanchuk, I. B., & Borschevskiy, G. I. (2018). Using the thermal methods of analysis in selecting the optimal production techniques for tablets based on ademetionine 1,4-butanedisulfonate substance. Farmatsevtychnyi Zhurnal, (6), 87-90. https://doi.org/10.32352/0367-3057.6.15.04
Section
Production, quality control, standardization of medicines